Processing and Characterization of Liquid-Phase Sintered NiTi Woven Structures
Shape Memory and Superelasticity
Porous NiTi is of interest for bone implants because of its unique combination of biocompatibility (encouraging osseointegration), high strength (to prevent fracture), low stiffness (to reduce stress shielding), and shape memory or superelasticity (to deploy an implant). A promising method for creating NiTi structures with regular open channels is via 3D weaving of NiTi wires. This paper presents a processing method to bond woven NiTi wire structures at contact points between wires to achieve structural integrity: (i) a slurry consisting of a blend of NiTi and Nb powders is deposited on the surface of the NiTi wires after the weaving operation; (ii) the powders are melted to create a eutectic liquid phase which collects at contact points; and (iii) the liquid is solidified and binds the NiTi woven structures. The bonded NiTi wire structures exhibited lower transformation temperatures compared to the as-woven NiTi wires because of Nb diffusion into the NiTi wires. A bonded woven sample was deformed in bending and showed near-complete recovery up to 6% strain and recovered nearly half of the deformation up to 19% strain.
Erdeniz, Dinc; Weidinger, Ryan P.; Sharp, Keith W.; and Dunand, David C., "Processing and Characterization of Liquid-Phase Sintered NiTi Woven Structures" (2018). Mechanical Engineering Faculty Research and Publications. 288.
Shape Memory and Superelasticity, Vol 4, No. 1 (March 2018): 70-76. DOI.
Dinc Erdeniz was affiliated with Northwestern University at the time of publication.