Simulation for Design Purposes of Magnetic Fields in Turbogenerators with Symmetrical and Asymmetrical Rotors Part I-Model Development and Solution Technique

Authors

Nabeel Demerdash, Marquette UniversityFollow
Howard B. Hamilton, University of PittsburghFollow
Gordon W. Brown, University of Pittsburgh

Document Type

Article

Language

eng

Publication Date

9-1972

Publisher

Institute of Electrical and Electronic Engineers (IEEE)

Source Publication

IEEE Transactions on Power Apparatus and Systems

Source ISSN

0018-9510

Abstract

A model the magnetic fields in turbo- generators with either symmetrical or asymmetrical rotor has been developed, and mathematically described and solutions obtained using the digital computer. The model was developed specifically for use in the design stage. It is applied to the entire cross-section of the generator and is applicable to a wide range of machine geometries.

Comments

IEEE Transactions on Power Apparatus and Systems, Vol. PAS-91, No. 5 (September 1972): 1985-1992. DOI.

Nabeel A. Demerdash was affiliated with Virginia Polytechnic Institute and State University at the time of publication.

Recommended Citation

Demerdash, Nabeel; Hamilton, Howard B.; and Brown, Gordon W., "Simulation for Design Purposes of Magnetic Fields in Turbogenerators with Symmetrical and Asymmetrical Rotors Part I-Model Development and Solution Technique" (1972). Electrical and Computer Engineering Faculty Research and Publications. 452.
https://epublications.marquette.edu/electric_fac/452