Permanent Magnet Modeling for Use in Vector Potential Finite Element field Analysis in Electrical Machinery

Authors

Fakhry A. Fouad, Virginia Polytechnic Institute and State UniversityFollow
T. W. Nehl, Virginia Polytechnic Institute and State UniversityFollow
Nabeel Demerdash, Marquette UniversityFollow

Document Type

Article

Language

eng

Publication Date

11-1981

Publisher

Institute of Electrical and Electronic Engineers (IEEE)

Source Publication

IEEE Transactions on Magnetics

Source ISSN

0018-9464

Abstract

A method for simulation of permanent magnet effects on the magnetic field in electrical machines is given. The method is suited for use with magnetic vector potential numerical models for the analysis of magnetic fields in electrical machines containing permanent magnets. The method was applied to the solution of magnetic fields under no load and load in two 15HP, 120 volt ferrite and samarium cobalt permanent magnet type brushless dc machines using finite elements. Search coil measurements of both flux and flux densities in the two machines were used to verify the present permanent magnet model. The numerical analysis and measurement results of the flux densities were in excellent agreement.

Comments

IEEE Transactions on Magnetics, Vol. 17, No. 6 (November 1981): 3002-3004. DOI.

N.A. Demerdash was affiliated with Virginia Polytechnic Institute and State University at the time of publication.

Recommended Citation

Fouad, Fakhry A.; Nehl, T. W.; and Demerdash, Nabeel, "Permanent Magnet Modeling for Use in Vector Potential Finite Element field Analysis in Electrical Machinery" (1981). Electrical and Computer Engineering Faculty Research and Publications. 461.
https://epublications.marquette.edu/electric_fac/461