The Civil and Environmental Engineering Faculty Research and Publications Series is comprised of books and articles published by Marquette University's civil and environmental engineering faculty.

Follow

Submissions from 2000

Link

Use of Vehicle-Collected Data to Calculate Existing Roadway Geometry, Alexander Drakopoulos and Ertan Örnek

Link

An Analytical Model for Time-Dependent Shearing Deformation in Area-Array Interconnects, Stephen M. Heinrich, Shilak Shakya, J. Liang, and P. S. Lee

PDF

Influence of Mortar Rheology on Aggregate Settlement, Michael F. Petrou, Baolin Wan, Francis Gadala-Maria, Venkata Giri Kolli, and Kent A. Harries

PDF

Excessive Strand End Slip in Prestressed Piles, Michael F. Petrou, Baolin Wan, Walter S. Joiner, Constantin G. Trezos, and Kent A. Harries

Submissions from 1999

Link

An Elastoplastic Beam Model for Column-Grid-Array Solder Interconnects, J. A. Swanson, Stephen M. Heinrich, and P. S. Lee

Submissions from 1998

Link

Crash Experience on Tined and Continuously Ground Portland Cement Concrete Pavements, Alexander Drakopoulos, Thomas H. Wenzel, Stephen F. Shober, and Robert B. Schmiedlin

Link

Effect of Component Heterogeneity on Global CTE Mismatch Displacement in Areal-Array Solder Interconnects, Stephen M. Heinrich, Shilak Shakya, and Ping S. Lee

Link

Shearing Deformation in Partial Areal Arrays: Analytical Results, Stephen M. Heinrich, Shilak Shakya, and Ping S. Lee

Link

Analysis of Contact Mechanics for a Circular Filamentary Brush/Workpart System, Chih-Yuan Shia, Robert Stango, and Stephen M. Heinrich

Submissions from 1997

Link

Driver Age as a Factor in Comprehension of Left-Turn Signals, Alexander Drakopoulos and Richard W. Lyles

Link

Prediction of Solder Geometry for an Axisymmetric Through-Hole Joint, A. F. Elkouh, N. Ramasubramanian, T. F. Hsu, Nicholas J. Nigro, Stephen M. Heinrich, Ping S. Lee, and D. Shangguan

Link

Improved Analytical Estimate of Global CTE Mismatch Displacement in Areal-Array Solder Joints, Stephen M. Heinrich, Shilak Shakya, and Ping S. Lee

Submissions from 1996

Link

Foreword to Special Issue on Solder Geometry, Stephen M. Heinrich

Link

Membrane Analogy for Saint-Venant Torsion: New Results, Stephen M. Heinrich

Link

Prediction of Solder Joint Geometries in Array-Type Interconnects, Stephen M. Heinrich, M. Schaefer, Scott A. Schroeder, and Ping S. Lee

Link

Improved Yield and Performance of Ball-grid Array Packages: Design and Processing Guidelines for Uniform and Nonuniform Arrays, Stephen M. Heinrich, Shilak Shakya, Yanhua Wang, Ping S. Lee, and Scott A. Schroeder

Link

Parametric Finite Element Method for Predicting Shapes of Three-Dimensional Solder Joints, Nicholas J. Nigro, F. J. Zhou, Stephen M. Heinrich, A. F. Elkouh, Raymond Fournelle, and Ping S. Lee

Submissions from 1995

Link

An Approximate Model for Predicting the Size and Shape of Wave-soldered Surface-mount Joints, B. U. Nambisan, Stephen M. Heinrich, Raymond Fournelle, A. F. Elkouh, Nicholas J. Nigro, and P. S. Lee

Submissions from 1994

Link

Prediction of Solder Joint Geometry, Stephen M. Heinrich

Link

Dynamic Modeling of Slab Formwork during Concrete Placement, Saeed Karshenas and Stephen M. Heinrich

Submissions from 1993

Link

[Review of] Variational Methods in Mechanics, Stephen M. Heinrich

Link

Effect of Chip and Pad Geometry on Solder Joint Formation in SMT, Stephen M. Heinrich, Paul Edwin Liedtke, Nicholas J. Nigro, A. F. Elkouh, and P. S. Lee

Link

Finite Element Method for Predicting Equilibrium Shapes of Solder Joints, Nicholas J. Nigro, A. F. Elkouh, X. Zou, Raymond Fournelle, Stephen M. Heinrich, and Ping S. Lee

Submissions from 1991

Link

Torsional Stress Interference in Transverse Isotropy, Stephen M. Heinrich

Link

Effect of Workpart Curvature on the Stiffness Properties of Circular Filamentary Brushes, Stephen M. Heinrich, R. J. Stango, and Chih-Yuan Shia

Submissions from 1990

Link

Solder Joint Formation in Surface Mount Technology—Part I: Analysis, Stephen M. Heinrich, A. F. Elkouh, Nicholas J. Nigro, and Ping S. Lee

Link

Solder Joint Formation in Surface Mount Technology—Part II: Design, Stephen M. Heinrich, Nicholas J. Nigro, A. F. Elkouh, and Ping S. Lee

Submissions from 1989

Link

Analysis of Constrained Filament Deformation and Stiffness Properties of Brushes, Stephen M. Heinrich, Chih-Yuan Shia, and Robert Stango

Link

Stress Interference in a Transversely Isotropic Body under Axisymmetric Loading, Stephen M. Heinrich and J. Y. Wang